I have tried to reconfigure from webconf just now. Does not change anything though.
I don’t think i reversed the ribbon cable during initial putting together. The display did show the splash screen from the beginning on.
My touchscreen doesn’t work also…
best regards
Martin
Hi @MartyMcFly!
Please can you confirm that you:
-
are using the last image
-
have updated the software
-
checked the output for this command:
cat /dev/input/event0
while using the touch surface. What is the result?
Regards,
Hi @vbretsch & @MartyMcFly!
Can you send me the output of:
# env
# lsmod
# cat /boot/config.txt
Thanks!
I am not at home anymore. Will try on friday and post results.
2 posts were merged into an existing topic: Zynthian Kit v1: Display not working with last Gorgona Edge SD image
So here it is. Output from env, lsmod and cat /boot/config.txt
env.log (2.1 KB)
boot_config.log (2.5 KB)
lsmod.log (1.7 KB)
Thanks for the help!
Regards,
Volker
Hello here are my files:Config.txt (2.6 KB)
env.txt (2.1 KB)
lsmod.txt (1.4 KB)
TNX for your help…
Best regards
Martin
Hi @vbretsch!
Please, could you tell me what USB devices you have connected to your Zynthian Box?
Thanks!
One USB Device: a Studiologic Numa Nero masterkeyboard.
Hi there,
any News?
Regards,
Volker
Have you tried the last SD image, “Gorgona Next” preconfigured for kits v2?
Regards!
A post was merged into an existing topic: Zynthian Kit v1: Display not working with last Gorgona Edge SD image
Hi there,
just updated to the new image via flashing a SD Card. Then ran update from UI twice and everything seems to be functioning smoothly BUT touch functionality. For some reason the screen does not respond to any interaction.
Regards,
Volker
Before updating, did you get working the touch functionality? With an updated Gorgona Edge?
In the next days i will add a little diagnostic script that should help to find and solve this kind of problems.
Regards,
Also, run this command:
cat /zynthian/config/zynthian_custom_config.sh
and send the output.
Regards,
No so far i have never experienced the touch functionality working.
cat /dev/input/event0
does not produce any output when touching the touch display
output from: cat /zynthian/config/zynthian_custom_config.sh is:
DISPLAY=:0 xinput --set-prop ‘ADS7846 Touchscreen’ ‘Coordinate Transformation Matrix’ -1 0 1 0 -1 1 0 0 1
Hi @MartyMcFly & @vbretsch!
Some advance with the touch display?
If you think the touch could be broken, i would like to replace it
Happy New Year!!