Build a ZynSeq with RPI3

[Wapata]

Reading old posts, it seem that my non working test can be due to the fact I’ve played with midi without adding a new chain :

Help with 2 Zynthian with Qmidinet

@wyleu mentioned an issue with autorouting that he thought was fixed but I have found that the route to / from qmidinet is not made automatically and needs a nudge, e.g. add/remove an synth chain. I understand the reason for this but don’t have a solution in my head yet. The routing graph is updated when configuration changes, e.g. add/remove a chain and there is a background check for change of MIDI interfaces that triggers an update of the routing graph but if qmidinet is enabled there is no c…