# Installation of SSD hat in v5.1

**URL:** <https://discourse.zynthian.org/t/installation-of-ssd-hat-in-v5-1/10366>\
**Category:** Hardware\
**Created:** [October 21, 2024, 9:52pm UTC](https://discourse.zynthian.org/t/installation-of-ssd-hat-in-v5-1/10366 "2024-10-21T21:52:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jofemodo](https://discourse.zynthian.org/user_avatar/discourse.zynthian.org/jofemodo/32/2_2.png) [@jofemodo](https://discourse.zynthian.org/u/jofemodo)\
**Post date:** [October 22, 2024, 4:02pm UTC](https://discourse.zynthian.org/t/installation-of-ssd-hat-in-v5-1/10366/2 "2024-10-22T16:02:07Z")

</div>

Look at this, @Tithrion :

> [@Oram/Pi5 Boot from NVMe?](https://discourse.zynthian.org/t/oram-pi5-boot-from-nvme/9558/71):
>
> Hi @all! FYI, i’ve been testing this NVMe expander for the RPi5: It fits perfectly the V5 case! Like designed for it!! nerd_face Off topic BTW, note the new position of the SD-card connector in the main board. I had to short the distance and improve the wiring so the sdcard synchronous signal could travel the distance in less than half period at the faster frequencies supported by the Pi5. FYI, RPI5 supports SDR104 cards at full …

Regards!

---

_[View the full topic](https://discourse.zynthian.org/t/installation-of-ssd-hat-in-v5-1/10366)._
