# Oram/Pi5 Boot from NVMe?

**URL:** <https://discourse.zynthian.org/t/oram-pi5-boot-from-nvme/9558>\
**Category:** Using Zynthian\
**Created:** [May 14, 2024, 1:30pm UTC](https://discourse.zynthian.org/t/oram-pi5-boot-from-nvme/9558 "2024-05-14T13:30:44Z")\
**Posts on this page:** 1\
**Showing post:** 71

<div class="post-metadata">

**Author:** ![jofemodo](https://discourse.zynthian.org/user_avatar/discourse.zynthian.org/jofemodo/32/2_2.png) [@jofemodo](https://discourse.zynthian.org/u/jofemodo)\
**Post date:** [June 26, 2024, 4:21pm UTC](https://discourse.zynthian.org/t/oram-pi5-boot-from-nvme/9558/71 "2024-06-26T16:21:45Z")

</div>

Hi @all!

FYI, i’ve been testing this NVMe expander for the RPi5:

> **[GeeekPi N10 Tiny NVMe SSD Adapter Board for Raspberry Pi 5 : Amazon.es:...](https://www.amazon.es/GeeekPi-N10-Adapter-Board-Raspberry/dp/B0D2M7D417)**
>
> Descripción: El N10 Tiny NVMe SSD adapter board is a specialized expansion board designed exclusively for the Raspberry Pi 5. It habilita Raspberry Pi 5 users to easily integrate NVMe SSDs into their projects, proporcionando almacenamiento de alta...

It fits perfectly the V5 case! Like designed for it!! 🤓

 ![photo_2024-06-17_08-34-18](https://discourse.zynthian.org/uploads/default/original/2X/7/78e91fe9a2825073f6f41e31c195f8212ed738e0.jpeg) ![photo_2024-06-17_08-33-52](https://discourse.zynthian.org/uploads/default/original/2X/3/3efba2c915c181b7727c6296f53baceefaee8510.jpeg)

**Off topic**  
BTW, note the new position of the SD-card connector in the main board. I had to short the distance and improve the wiring so the sdcard synchronous signal could travel the distance in less than half period at the faster frequencies supported by the Pi5. FYI, RPI5 supports SDR104 cards at full speed, what means the bus frequency is 208MHz, compared with the RPI4 that only supports DDR50 with the data bus running at 48MHz. If you do some calculations, you can see how close to the physical limit we are, so every mm counts and i had to deploy “best practices” for routing high frequency signals. Much fun when it finally worked! 😅

This is the detail of routing:

 ![Captura de pantalla de 2024-06-26 18-51-20](https://discourse.zynthian.org/uploads/default/original/2X/9/954f05e2bd4b5e504b833f6ade9ccdbfcd12d3ab.png)

Note the track-length matching, to keep the signal synced and the “big” separation between tracks to avoid cross-talking.

Regards!

---

_[View the full topic](https://discourse.zynthian.org/t/oram-pi5-boot-from-nvme/9558)._
