Good evening everyone,
Me and a team of 3 others are attempting to build a Zynthian for a class project at UCSD. However, we have run into some issues, mainly that we cannot locate the Zynthian at zynthian.local or its ip address to Webconfig it for our first time boot.
Our setup is 2-in-1 PCB, 2x Dual Controller Modules, RbPi 3, Hifiberry DAC+RCA, this screen from Amazon:
and finally, we hand built the cable to go between screen, pi, and pcbs using @C0d3man’s guide for alternate cabling on the wiki. All wires were checked for continuity with a multimeter.
I think our issue may stem from being on the school internet network as we have tried the following combinations:
Direct ethernet connection between Zynth and Mac
Direct ethernet connection between Zynth and Windows
Direct ethernet connection between Zynth and Virtual Box Linux
Both plugged into room wall router in dorms on Mac
Both plugged into room wall router in dorms on Virtual Box Linux