Hi, i am currentlly building my kit along the Wiki instructions.
In chapter 3.4 “Assembling the 2in1 module” it says:
- 1 x resistor 1K (R1) => red-black-brown
- 1 x resistor 10K (R2) => orange-black-brown
- 1 x resistor 220 (R3) => red-red-black
Thats wrong.
1k is brown-black-red
10k is brown-black-orange
220 is red-red-brown
Always read from left to right with the tolerance ring on the right.
Regards, Thorsten