#     Zyntian V5 screen starts upside down, but touch mapping is correct

**URL:** <https://discourse.zynthian.org/t/zyntian-v5-screen-starts-upside-down-but-touch-mapping-is-correct/13074>\
**Category:** Software\
**Created:** [April 28, 2026, 11:28pm UTC](https://discourse.zynthian.org/t/zyntian-v5-screen-starts-upside-down-but-touch-mapping-is-correct/13074 "2026-04-28T23:28:01Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![tunagenes](https://discourse.zynthian.org/user_avatar/discourse.zynthian.org/tunagenes/32/7279_2.png) [@tunagenes](https://discourse.zynthian.org/u/tunagenes)\
**Post date:** [April 29, 2026, 4:57am UTC](https://discourse.zynthian.org/t/zyntian-v5-screen-starts-upside-down-but-touch-mapping-is-correct/13074/4 "2026-04-29T04:57:56Z")

</div>

There is a lot of related info in:

> [@Raspberry Pi Touch Display 2 - Rotate screen](https://discourse.zynthian.org/t/raspberry-pi-touch-display-2-rotate-screen/10804):
>
> Hi, I have a Raspberry Pi 5 8gb, and just setup a new ‘Raspberry Pi Touch Display 2‘. I have installed the latest oram software. Does anyone know how to get the screen to rotate from portrait to landscape. I have spent a fully evening and haven’t been successful. I am in the webconfig (Hardware-\>Display advanced options) , and can’t figure out how to rotate. I suspect it can’t be done. I have been able to swap the x and y, using the following in the config: dtoverlay=vc4-kms-dsi-ili9881-7in…

But of course a lot of it may not apply to your display, just wanted to point there for you to judge if it’s worth experimenting.

---

_[View the full topic](https://discourse.zynthian.org/t/zyntian-v5-screen-starts-upside-down-but-touch-mapping-is-correct/13074)._