Europi: a digital DIY step sequencer with cv/gate output based on a RPi

C0d3man · February 28, 2020, 6:11pm

AudioMorphology/Europi/blob/master/README.md

# Europi

## Overview

The Europi is a 16hp Eurorack format sequencer powered by the Raspberry Pi single board computer. It is a digital sequencer that outputs Control Voltages (CV) and Gate signals, and can be controlled by a variety of signal sources including its own internal clock, external clocks, rotary encoders, MIDI sources and the like.

Europi has been designed to be modular and expandable. The main Europi module, which interfaces directly with the Raspberry Pi has the following features:

320 x 240 pixel 16-bit colour touchscreen display
Continuous rotary push-button encoder
4 x tactile 'soft' buttons
2 x 1 v/Oct CV output (16-Bit resolution over a 10 volt range)
2 x Gate ouputs (+5 volt leading-edge triggered)
Clock Out
Clock In
Step 1 Out
Reset In

The primary Europi module interfaces with a number of secondary modules.

This file has been truncated. show original

Seems to be a cool toy

jofemodo · May 6, 2021, 3:05am

Zynthian’s CV/Gate implementation is almost finished for IN & OUT:

Regards,