Keypads arrived and are great quality for the price. Easy to setup wia web interface, I have one as keys 1-9 and the other is A,B,C, ESC, Enter and arrow keys.
I have assigned most of the keys in the UI editor, only issue I am having is getting zynswitch 3 to work as the main ‘enter’ button, set as zynswitch 3,S but it does give two commands. eg. pressing it on the pianroll screen will create a note then remove it in the same press. I can assign to other keys and it does the same thing. I did try 3,R and 3,P but they did not work at all.
Same issue as sacred.goose was having in this thread.
It’s all in bits again now while I work on the case. Can post logs/video when that’s done.
I’ve shortened the USB-C cables 
