Hello all,
I can report successful OTG connection of Zynthian to my midi setup.
For correct wiring I used this:
-
Y cable USB 3.0-A/Female ->USB 3.0-A/Male connected to USB HUB
->USB 2.0-A/Male connected to power source 20W -
cable USB 3.1 C/M - USB 2.0 A/M, Super fast charging 5A, conected to Y cable and to USB-C connector of Zynthian (Raspberry 4B).
Znythian is conected to PC under name “MIDI function” as can see on figure from Bome Midi Translator. I quickly tested also output form Zynthian and is working.
