Sequencer – eyternal Clock not working

tunagenes · August 9, 2024, 8:25pm

From this Oram related topic-thread I think you will find that External Midi Clock Sync works in Oram:

a breadcrumb for searchers:

github.com/zynthian/zynthian-issue-tracking

"Clock source" state in "Tempo settings" not restored on boot/reboot.

opened 02:51PM - 16 Jun 24 UTC

closed 07:54PM - 19 Jun 24 UTC

gitnob

Bug

# Describe the issue "Clock source" state in "Tempo settings" not restored on b…oot/reboot. # To Reproduce ## Steps to reproduce the behavior: 1. Set Timing to midi clock syncing (in "Tempo settings" at "clock source". 2. Use external controller to sync zynthian’s clock. 3. Reboot. 4. Go to tempo settings. Without changing anything. 5. Start external controller and change bpm of external midi sync. → No change in zynthian’s tempo settings. 6. Switch “Clock source” from “midi” to something else and back to “midi”. 7. Change tempo of external midi controller again. → Zynthian is following the change. My suggestion: initialization of “tempo settings” “clock source” state not restored correctly during boot process. I tried it on V4 and V5, same issue. ## Expected behaviour State of "clock source" initialized after boot/reboot process. ## Actual behaviour State not restored, but shown in zynscreen. # Additional context Forum: https://discourse.zynthian.org/t/syncing-to-external-midi-clock-shown-on-zynscreen-but-not-set-after-boot-reboot/9700 # Configuration ## Hardware ``` Raspberry Pi 4 Model B Rev 1.2 Audio: HifiBerry DAC+ ADC PRO Display: ZynScreen 3.5 (v1) Wiring: MCP23017_ZynScreen I2C: MCP23017@0x20 Profile: v4_stage ``` ## System ``` Debian GNU/Linux 12 (bookworm) Build Date: 2024-02-01 Memory: 15% (594M/3792M) SD Card: 24% (14G/58G) Temperature: 52.5ºC Overclock: None ``` ## MIDI & UI ``` Tuning: 440 Hz Master Channel: Off Preload Presets: On ZS3 (SubSnapShots): On Power Save: 0 minutes Audio Levels on Snapshots: On ``` ## Software ``` zyncoder: oram (e0014fe) zynthian-ui: oram (e01d4b9) zynthian-sys: oram (8602194) zynthian-data: oram (e222e11) zynthian-webconf: oram (2dba270) ```

“Clock source” state in “Tempo settings” not restored on boot/reboot. #1091 - Closed
gitnob opened this issue Jun 16, 2024